Contact
| Technical Data | |
|---|---|
| Areas of application | Mobile |
| Microcontroller | ATMEL AT91R40008 32 bit 64 MHz |
| CAN channels | Up to four independent channels, according to the Cab; sending and receiving 100% bus load; certified Vector CAN controller (FPGA) |
| LIN channels | Up to four independent channels, according to the Cab; sending and receiving 100% bus load (Q4/2008) |
| Identifier | 11/29 bit |
| Transceivers (magnetical decoupling) and optional equipment | Support of all CAN/LINcabs and of the new TWINcabs (LIN: Q4/2008) see bus transceiver overview (PDF) Support of IOcab 8444opto and J1708cab 65176opto (Q4/2008) |
| PC interface | ExpressCard 54; usage in notebooks only* |
| Hardware time synchronization | With SyncBox XL and SYNCcableXL |
| Temperature range | Operation: 0..+55 °C Transport and storage: -40..+85 °C |
| Driver libraries for | C++, C, .NET (C#, Visual Basic, Delphi) |
| Operating system | Windows 2000, XP, Vista |
| Error Frame/Remote Frame | Detection & Generation |
| Max. baud rate | 1 Mbit/sec |
| Dimensions approx. | ExpressCard 54 (75 mm x 54 mm, 26 Pin) |
| Power consumption (typ.) | 1.9 W |
| Time stamp accuracy | 1 µs |
| Average response time |  100 µs |
Detailed information about interfaces for CAN/LIN is available in the data sheet. * - Note: Actual desktop PCs do not support ExpressCards satisfactory. Because Vector can currently guarantee the correct and reliable function of the CANcardXLe for notebooks only we strongly disadvice to use the card in desktop PCs. The CANcardXLe is currently not approved for using in desktop PCs.
| [< back to overview CAN/LIN interfaces] |
